MiAccess Readers

MiAccess access readers are available in a surface silver (MTPXS-MF-SA) or matt black finish (MTPXBK-MF-SA) and also in a flush white (DINMTPXW-MF-SA), silver (DINMTPXS-MF-SA) or grey (DINMTPXC-MF-SA) finish. The surface readers have resin potted electronics giving them protection against the elements and allowing them to be mounted externally, however they can be mounted internally if desired. The flush readers can only be mounted internally.

A 4000 series (4849MI) in a mirror stainless steel or matt 316 grade stainless steel (/M) finish and also a VR4K series (VR4KMI) MiAccess reader are available, both of which are compatible with the full range of 4000 series surface and flush back boxes. An 8000 series reader is available, 8849MI, and is compatible with the full range of 8000 series surface and flush back boxes. Also a Vandal Resistant panel mount MiAccess reader (VRMI) is available for the VR120 series, VR130 series and bespoke Vandal Resistant panels.

All readers can be programmed and configured directly using the PROA-MS or PROH-MS PC management software (available to download for free from https://software.videxservices.uk) using the micro-USB connection on the back of the reader. MiAccess fobs and cards are initally registered via the USB desktop reader (PROX-USB) connected to a laptop or PC and then the fob and card data along with reader configuration can be uploaded to the MiAccess reader.

Features

  • Surface or Flush mounting options available
  • IP65 rated moulded aluminium (in silver finish) or high impact matt black ABS finish surface readers for internal or external use
  • Single gang flush readers available in 3 finishes (silver, grey or white) for internal use only
  • Readers also available for the 4000 series, 8000 series and VR4K series
  • Panel mount reader available for Vandal Resistant panels
  • Mifare reader with sector read/write and support for Mifare classic, 1K & 4K card types
  • Read range of up to 6cm with an operating frequency of 13.56MHz
  • Programming and configuration using PC software
  • Firmware upgrades supported via the micro-USB connection
Find a distributor

MiAccess Surface, Flush, 4000, 8000, VR4K series and VRMI Readers:

  • Operating Voltage: 12Vdc power input
  • Current Consumption: 150mA (max.) during operation
  • Data Connectivity: micro-USB port for connection to a PC
  • Outputs: 1x built-in relay (2A @ 24Vac/dc) programmable from 1-255 seconds or 0 seconds for ON/OFF toggle mode, 1x RS485 bus connection for remote ‘touch to exit’ button and relay unit (RTTS surface or DINRTT flush)
  • Inputs: push button
  • Tamper Protection: Yes
  • Status Indication: Tri-colour halo LED (amber, green and red) and buzzer;
  • IP Rating: IP65 (for surface readers only)
  • Working Temperature: -20°C to +50°C

Dimensions (mm):

  • Surface readers: 51 (W) x 92 (H) x 25 (D) – MTPXS-MF-SA & MTPXBK-MF-SA
  • Flush readers: 86 (W) x 86 (H) x 40 (D) for standard UK single gang box – DINMTPXS-MF-SA, DINMTPXC-MF-SA & DINMTPXW-MF-SA
  • 4000 & VR4K readers: 103 (W) x 120 (H) x 30 (D) – 4849MI & VR4KMI
  • 8000 reader: 97 (W) x 120 (H) x 30 (D) – 8849MI
  • Vandal Resistant readers: Overall dimensions dependent on VR panel size

Surface Readers:

  • MTPXS-MF-SA – Surface MiAccess proximity reader with smart Mifare PC programming and USB port (silver)
  • MTPXBK-MF-SA – Surface MiAccess proximity reader with smart Mifare PC programming and USB port (matt black ABS finish)

Flush Readers:

  • DINMTPXS-MF-SA – Flush MiAccess proximity reader with smart Mifare PC programming and USB port (silver)
  • DINMTPXC-MF-SA – Flush MiAccess proximity reader with smart Mifare PC programming and USB port (grey)
  • DINMTPXW-MF-SA – Flush MiAccess proximity reader with smart Mifare PC programming and USB port (white)

Additional Readers:

  • 4849MI – 4000 series MiAccess proximity reader with smart Mifare PC programming and USB port
  • 8849MI – 8000 series MiAccess proximity reader with smart Mifare PC programming and USB port
  • VR4KMI – VR4K series MiAccess proximity reader with smart Mifare PC programming and USB port
  • VRMI – Add a MiAccess proximity reader with smart Mifare PC programming and USB port to a Vandal Resistant series panel