380N/UK Telephone interface

The 380N/UK is a self contained telephone interface module for use on an analogue telephone line. Its primary function is to enable a user to communicate with an analogue telephone line and a door entry point (or points) using the same telephone handset. The handset can be a standard corded model, a cordless such as a DECT telephone or even a hands free telephone.

The 380N/UK can also be configured for use with a PABX (Private Automatic Branch Exchange) telephone system to be connected into either a spare analogue trunk input or spare telephone extension. All programming is carried out using the telephone keypad (utilising standard DTMF tones).

Features

  • Communicate with both a telephone line and door entry points
  • Open a door using the telephone keypad
  • Open the speech to a door entry point without being called first
  • Activate up to two auxiliary outputs (momentary or latching)
  • Reverse the door open relay for use with fail safe lock releases
  • Programmable adjustments including: number of rings, door open time, door open key, speech volume
  • Divert call to pre-programmed number
  • Program an access code to lock programming settings
  • PABX mode allows the unit to operate without a telephone line (also allows it to be connected to a PABX telephone system)
  • Dial in facility allow the 380N/UK to be activated from an incoming call
Find a distributor
  • Input voltage: 230Vac mains input (50/60Hz)
  • Max REN output: 2
  • Output voltage: 2x 12Vdc output (200mA max.)
  • Relay output: C, NO (reversible NO output to NC)
  • Auxiliary outputs: A1, A2 (transistor switched low output 200mA max.)
  • Telephone line input: L1, L2 or RJ11 socket
  • Telephone line output: T1, T2
  • Telephone line connection: Standard incoming BT line¬†(analogue) or PABX system (analogue trunk input or analogue extension)
  • Ringing frequency adjustment: JPA, JPB (25Hz or 50Hz)
  • Speech volume controls: electronically via programming and/or balance control POT
  • Programming: Via telephone keypad (compatible with standard DTMF tones)
  • System compatibility: Videx – 3+1, 4+1, 5+1 audio systems, VX2200 and VX2300 digital systems
  • Mounting: Surface – DIN bar or direct wall fixing
  • Dimensions: 157.5mm x 105mm x 65mm (9 module DIN)
  • 380N – Telephone interface module
  • 2280-1 – Interface module for the VX2200 digital system
  • 2380 – Interface module for the VX2300 digital system
  • BT100 – BT surface master socket